Author Topic: Baofeng Tone and TX customization questions  (Read 1146 times)

Offline Greekman

  • Survival Demonstrator
  • *******
  • Posts: 4050
  • Karma: 207
  • New TSP Forum member
Baofeng Tone and TX customization questions
« on: March 21, 2020, 01:58:06 PM »
I have been having programming perplexions with my Baofeng

While programming with Chirp I noticed the tone Squelch Feature. which is seperate from the usual tone which I programmed for repeater use 67 and 88.5 in the picture.
Also, what is cross-mode?

I found a source for the difference of, but I cannot understand the difference

2. I ordered a triband Baofeng version, but what came did not seem to be triband (220Mhz).
The radio did not allow manually setting a frequency on the range

But since I sat down with Chirp I thought of tinkering the VHF range. I set the upper limit at 260 MHz and now it teansmits allright!

What happened? Was the radio triband capable from the factory and was just not activated?
Or did i set it out of specs?

thanks beforehand, greekman