Survivalism & Self Sufficiency Topics > Amateur Radio How-To's

24hr LED clock on HAM "go box" ?

(1/2) > >>

Smurf Hunter:
As I'm getting my feet wet in HAM, I continue to be fascinated by folks who've assembled mobile rigs in portable cases.

While this isn't in my immediate plans, I may get there eventually.  One item that I'm not sure I've seen, is a digital clock - ideally set to UTC in 24hr format.
I noticed these are cheap on eBay: http://www.ebay.com/itm/like/190898607463?lpid=82

Supposedly these cheap little clocks I linked to should keep time when powered off (somehow).


--- Quote ---Features : 
Dimensions: 40.5mm ×24mm×17.5mm
Cutting size: 37.5mm×21mm×17.5mm
Power voltage: DC 7v-30V
Time mode: 24 Hours
Display Color: blue
Display: four 0.30" LED digital tube
Refresh rate: about 300ms
Time setting: single button to a sliding scale
Power off: keep time working 2 years (LED do not light)
Accuracy: 10ppm
Overload: four times the range
Operating temperature: -40°c - 85°c
--- End quote ---

I think having UTC time and current voltage displayed could be really helpful esp. for longer distance HF rigs spanning time zones.

Alan Georges:

--- Quote from: Smurf Hunter on May 23, 2014, 10:36:04 AM ---Supposedly these cheap little clocks I linked to should keep time when powered off (somehow).

--- End quote ---
Probably just powers down the LED display.  The internal clock won't draw very much at all.  It may have a little battery just to keep the internal clock going.


--- Quote ---I think having UTC time and current voltage displayed could be really helpful esp. for longer distance HF rigs spanning time zones.

--- End quote ---
Immensely useful, especially when doing very long-rang stuff, keeping log books, sending QSL cards, etc.  Also good to have around for shortwave listening, since most stations post their broadcast times in UTC.

I use this little MFJ UTC/Local time unit: http://www.mfjenterprises.com/Product.php?productid=MFJ-108B  It gets the job done, and is small enough to haul on a bug-out.

Smurf Hunter:
As much trash talk as there is against "cheap chi-com" stuff, it's amazing I can order stuff like this:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390844253562

for less than a cup of coffee.

backwoods_engineer:
It's not bad.  I have used a cheapie LCD stick-on clock set to UTC.  MFJ Enterprises (known affectionately in the ham world as "Mighty Fine Junk") sells several UTC LCD clocks, with dual displays and the like, and one even sets itself to WWVB.

--bw

Carl:
Kind of a "CURB FEELER", ie extra chrome to have to adjust ,re-adjust, or stick back on when it fails. The VOLTAGE reading is OK though, and useful. As UTC is just and HOUR conversion from local time,rather than a completely different standard it is just something EXTRA to carry and support.

On the battery condition line though,in use we have found THIS a handy device: WATTS-UP

http://www.amazon.com/Watts-Meter-Analyzer-WU100-Version/dp/B001B6N2WK/ref=sr_1_1?ie=UTF8&qid=1400881192&sr=8-1&keywords=RC+voltage+current+meter

Navigation

[0] Message Index

[#] Next page

Go to full version